Base Structure Systems
Carport | Tile Roof | Hanger Bolt | Metal Roof | Roof Matrix | Ground Mount | Ground Terrace | Floating PV | Tilt Mount
Carport System
Pre-assembled ground solar mounting system which is ideal for large commercial and utility-scale solar PV projects.
The system has been developed for various photovoltaic modules and will be customized to fit into the parking lot or designed according to specific requirements.
The Carport System can protect the cars to avoid damage from sunshine, wind, rain water, and snow.
AHME engineers continue to optimize the design of system, the quality of product and service, and also provide the best solution for your Solar Carport System
- Customized Solution Design case by case, making a good utilization of ground resource and pursuit for easy and quick installation.
- High Waterproof The special waterproof conforms to the structure of system, which make the performance Stronger.
- Save Installation Time and Labor Cost on Site With installation manuals and system solution, the construction on site will be simple. Less construction time directly reduces project costs.
- Compatible to Varied Solar Modules With module clamps, the system compatible with most kinds of framed and frame and frameless modules.
Tile Roof System
Applied tile roof residential and commercial solar projects.
The system can achieve stable and strong connection between the roof support structure and solar modules with modular Patented design.
Pre-assembled kits save the installation time and cost onsite.
- Applicable for Different Metal Roofs Design project by project, selecting configuration of mounting system components flexibly.
- Save Installation Time and Cost Pre-assembled components and clear installation manuals are supplied to save the onsite installation time and cost, lead to better ROI
- Compatible to Different Types of Solar Modules Compatible to most kinds of framed 60-cell, 72-cell, half-cut cells modules and frameless modules.
Hanger Bolt System
Applied in most Corrugated Metal Roof commercial and industrial solar projects.
The system can achieve stable and strong connection between the roof support structure and solar modules with modular Patented design.
Pre-assembled kits save the installation time and cost on site.
Metal Roof Clamp System
Trapezoidal Metal Roof Clamp Solar PV Mounting System (with Rail) is applied to Trapezoidal Metal Roof commercial and industrial solar projects.
The system can achieve stable and strong connection between the roof support structure and solar modules with modular Patented design.
Pre-assembled kits save the installation time and cost onsite.
- Applicable for Different Metal Roofs Design project by project, selecting configuration of mounting system components flexibly.
- Save Installation Time and Cost Pre-assembled components and clear installation manuals are supplied to save the onsite installation time and cost, lead to better ROI.
- Compatible to Different Types of Solar Modules Compatible to most kinds of framed 60-cell, 72-cell, half-cut cells modules and frameless modules.
Roof Matrix System
Roof Solar PV Mounting System Matrix I (East-West / Dual-Orientation) is a non-penetration solution for flat rooftop in tropical areas.
The system achieves high wind resistance performance and fast onsite installation with concrete ballast and patented structure design.
Unique dual-orientation design makes better utilization of rooftop area and higher power generation.
- High Durability Ensure the Structure Strength Professional structure design and high-density aluminum material ensure the stability and strength of the structure.
- Unique Dual-Orientation Matrix Design The unique dual-orientation matrix design, no request for wind deflector, lead to lower structure cost and lower ballast weight, increasing the installation capacity, which further assures the stability of the whole system and flexibly compatible with concrete block or ballast foundation.
- Reasonable Installation and Package Design Simplified components configuration lead to quicker installation and smaller package size, saving installation cost and freight
Ground Mount System
Ground Terrace PGT4 is optimized from GT4, suitable for medium to large scale solar PV projects.
Main beams and post are optimized with better design and less material, with strong wind load and snow load resistance.
The system can achieve minor adjustment onsite with special design of Anchor Plate to adapt to different sites.
Patented and certified system design ensure projects safety and quick installation.
- Symmetrical Design of Tilt-in-Nut and Rail Channel No direction limitation for the nut and rail channel, improving the installation efficiency.
- No Drill on Portrait Beam It improves the strength of the system to fix the portrait beam onto the post by special designed clamps, with force at the same direction of the gravity.
- Pre-assembled Components Save Onsite Installation Time Solution design case by case, most components pre-assembled in factory, no onsite cut and drill request, saving the onsite installation time and cost.
- Flexibility and Adjustability The structure can be adjusted with some tolerance with east-west, west-south and south-north directions, assuring flexible on-site installation to achieve best yield for solar modules
Ground Terrace System
Ground Terrace GT2 is a highly pre-assembled ground mounting system, which can be applied to the installation of large commercial and utility scale solar PV projects.
Made of high quality aluminum material, GT2 has excellent corrosion resistance performance.
The single-pile patented structure design saves installation time and cost, with good compatibility to varied solar modules.
- Pre-assembled Components Save Onsite Installation Time Solution design case by case, most components pre-assembled in factory, no onsite cut and drill request, saving the onsite installation time and cost.
- Single-Pile Design Single-pile design reduce half of the ramming time, saving the construction cost
- Structure Configuration Multi-Options Single or double embrace bars structure configuration available to meet varied projects requests.
- Flexibility and Adjustability The structure can be adjusted with some tolerance with east-west, west-south and south-north directions, assuring flexible on-site installation to achieve best yield for solar modules.
Floating PV System
PV Mounting System G4S is applied to solar PV power plant installation on the water.
Adopting HPDE material, it has passed the Hunt Water Absorption Test, Anti-Aging Test, Anti-UV Test etc.
Moreover, it can bear the pulling force that is much higher than other products.
Adopting new module design in floater and main floater, it can realize the array of double row in the same facing or in symmetrical facing, which can increase the efficiency of solar power generation and installation capacity, be easily installed, and save the cost. and its lifetime has more than 25 years
- Modular design, simple and convenient splice installation
- Increase the volume of floater to add the buoyant force of floater
- The floater is made of high density polyethylene, which ensures its long service time
- Various array design, easier to combine
- Realize symmetrical facing array, increase the installation capacity, maximize the efficiency of power generation
- Compatible with various solar module, save the cost
- Strong weather ability, easy to operation and maintenance.
Tilt Mount System
Tripod system is used for metal roof concrete roof, with adjustable angle as 10-15deg, 15-30deg and 30-60- deg options to maximize energy production.
All Products pre-assembled before shipment, to make the installation easy and quick for saving your labor cost and time.
Customized angle allowed according to customer needs to meet special installation requirements.
Solar System Applications
Offices Library Hotel Gym Laboratory School
Ground Type Installation
